Add your company’s logo and URL to preview the message; select the language for the message and preview it. Configure Organizational Messages from Intune Portal Fig.5. Here In the Message tab, you will also have the option to set the theme for your message. I had toggled the switch to turn on the dark theme and move to the Schedule tab. Devices check in with Intune when they receive a notification to check in, or during the scheduled check-in. When you target a device or user with an action, then Intune immediately notifies the device to check in to receive these updates. For example, when a lock, passcode reset, app, or policy assignment action runs. flag Report.

su

jr

hm

Stale device is the inactive device for a period of time. It is worked with Intune cleanup rules. You can set your Intune device cleanup rules to delete Intune MDM enrolled devices that appear inactive, stale, or unresponsive. ... Devices that aren't assigned a compliance policy and don't have a trigger to check for compliance; Devices that haven't checked in since.

For device be to listed in AAD it has to complete its enrollment via Company Portal. This is where it gets its Azure AD Device ID assigned. This is based on below: After completing all the Setup Assistant screens, the end user lands on the home page (at which point their user affinity is established). However, until the user signs in to the. The dmwappushservice service is required on client devices for Intune management. If this service is disabled, the device can't sync with Intune. Solution To fix the issue, change the startup type of the dmwappushservice service to Automatic. Recommended content Troubleshoot when you cannot delete a Windows Autopilot deployment profile - Intune.

iy

I have a device connected to Intune, I can see the device into the Intune Portal, I have synced from both sides, portal and enrolled device, but the compliance is "Not Evaluated" and the device configuration state is pending. ... Therefore, it's as expected if the compliance device is not Evaluated. Please check the possible reasons in the. Add your company’s logo and URL to preview the message; select the language for the message and preview it. Configure Organizational Messages from Intune Portal Fig.5. Here In the Message tab, you will also have the option to set the theme for your message. I had toggled the switch to turn on the dark theme and move to the Schedule tab. Add your company’s logo and URL to preview the message; select the language for the message and preview it. Configure Organizational Messages from Intune Portal Fig.5. Here In the Message tab, you will also have the option to set the theme for your message. I had toggled the switch to turn on the dark theme and move to the Schedule tab.

nn

pp

  • Give Your Audience What They Want:Windows Autopatch is a cloud service provided, by Microsoft, that automates the update process for Windows, Microsoft 365 Apps for enterprise, Microsoft Edge, and Microsoft Teams. The steps to get started with Windows Autopatch are pretty straight forward, especially with the latest adjustments of how the service interacts with the tenant. vcpkg users: check if you are using a vulnerable version of OpenSSL. WARNING: It is possible that OpenSSL is a part of your dependency graph even if your project does not directly depend on it. This is because other vcpkg ports may transitively depend on OpenSSL and thus vcpkg will install it for you.
  • Know if Your Product is Popular:MS told that Time sync problems may potentially affect Intune Device check in. So it first of all this 2 Different Time Value indicators (I guess one of them is Polycom Device time and second is Teams Client). And it also incorrectly syncs time zone i.e. device on the screen set to GMT+3 without winter time but it still shows GMT+4 Time. txxb
  • Discover Your Competitors:Step 1: Install the language accessory pack. Select the version of Office you're using from the tabs below, then select the language desired from the drop-down list. Then choose the appropriate architecture (32-bit or 64-bit) from the download links provided. If you are unable to view the device in Intune Console and Info button is unavailable, the device has not enrolled into Intune for some reason. Check licenses for these users . Confirm that.
  • Realize Your Competitors Price:Sign in to the Microsoft Endpoint Manager admin center. Select Devices. This view shows detailed information about the individual devices, and what you can do with them,. upI have a device connected to Intune, I can see the device into the Intune Portal, I have synced from both sides, portal and enrolled device, but the compliance is "Not Evaluated" and the device configuration state is pending. ... Therefore, it's as expected if the compliance device is not Evaluated. Please check the possible reasons in the.
  • Determine How to Price Your Products:uwug

ye

  • gqwldm
  • Sign in to the Microsoft Endpoint Manager admin center. Select Devices > Configuration profiles. Select your email profile > Properties > Settings. Set the Allow e-mail to be sent from third-party applications setting to Enable. Recommended content iOS/iPadOS device enrollment - Apple Configurator-Setup Assistant - Microsoft Intune. yrThis article will describe what to when when Windows Updates are not installing on Intune devices. Situation: Customer coming from SCCM device management & application deployment. Migrated to Hybrid Joined Intune MDM managed devices. Updates came through SCCM pointing to WSUS server (location), configured by a GPO. Target:.
  • lajtIf you are unable to view the device in Intune Console and Info button is unavailable, the device has not enrolled into Intune for some reason. Check licenses for these users . Confirm that. First, I went into ADD into Mobility (MDM and MAM) under Microsoft Intune and I have configured a “MDM User Scope” and “MAM User Scope” to be “Some” and I have select a group call “Intune Users” who members are myself and my Windows 10 Device. this procedure: https://docs.microsoft.com/en-us/intune/windows-enroll.
  • Step 1: Install the language accessory pack. Select the version of Office you're using from the tabs below, then select the language desired from the drop-down list. Then choose the appropriate architecture (32-bit or 64-bit) from the download links provided. Try the Windows Event logs as a next step in troubleshooting MDM issues. The MDM management events are logged to: Applications and Services Logs\Microsoft\Windows\DeviceManagement-Enterprise-Diagnostics-Provider\Admin. Note the value in the Device limit column. In the Microsoft Endpoint Manager admin center, choose Users > All users > select the user > Devices. Note the number of devices the user has enrolled. If the user's number of enrolled devices already equals their device limit restriction, they can't enroll anymore until: Existing devices are removed, or.
  • jlncThis can only be done if they're enrolled through apple business manager. The device (enrolled in intune) will become supervised and will let you force the update. We unfortunatly have a lot of devices that are in use that are not enrolled through business manager and therefore can not force all devices to update. [deleted] • 9 mo. ago. Add your company’s logo and URL to preview the message; select the language for the message and preview it. Configure Organizational Messages from Intune Portal Fig.5. Here In the Message tab, you will also have the option to set the theme for your message. I had toggled the switch to turn on the dark theme and move to the Schedule tab.

ds

as

Devices check in with Intune at least every 8 hours. If it's been more that 24 since last check-in, there might be a problem with the device. A device that cannot check in cannot receive policies from Intune. To force a device to check in, follow the set of instructions below that matches the device's OS. These steps can be done from any.

Answer. If you just enrolled Windows 10 to Intune not long ago, maybe the process needs some time to take effect, please wait for a while, then view if outcome is different. If it still doesn't take effect, please check whether you are using ADFS, assigning a user to a specific Autopilot device doesn't work if you are using ASFS, for details. By default, Intune devices check in every 8 hours. If Last check in is more than 24 hours, there may be an issue with the device. A device that can't check in can't receive your policies from Intune. To force check-in: On the Android device, open the Company Portal app > Devices > Choose the device from list > Check Device Settings.

au

el

It will only show in the Intune portal after a enrollment into Intune. That can be achieved by configuring automatic Intune enrollment with Azure AD join and then performing an Azure AD join, or by doing a "normal" enrollment via Settings > Accounts > Access work or school > Connect. My Blog: http://www.petervanderwoude.nl/.

Answer. If you just enrolled Windows 10 to Intune not long ago, maybe the process needs some time to take effect, please wait for a while, then view if outcome is different. If it still doesn't take effect, please check whether you are using ADFS, assigning a user to a specific Autopilot device doesn't work if you are using ASFS, for details.

rm

dk

When BitLocker fails to enable on a Windows 10 device using an Intune policy, in most cases, the hardware or software prerequisites are not in place. Examining the BitLocker-API log will help you identify which prerequisite is not satisfied. The most common issues are: TPM is not present; WinRE is not enabled; UEFI BIOS is not enabled for TPM 2.

is

To generate a sysdiagnose, run the following command from the enrolled Mac device with your desired save location (e.g. /Desktop for the logged in users’ desktop): sudo sysdiagnose -f /path/to/desired/save/location To view just jamfAAD logs on a Mac for quick troubleshooting, run this command on the Mac to get the last 30 minutes of data:. Intune -Troubleshooting and Learnings. We are rolling out Intune Compliance and Configuration Policies. MDM (Enrolled) for corporate devices and MAM (unenrolled) for Personal devices. We are using MDM and MAM to rollout (Windows Information Protection) WIP. We are not using Config Manager, and all devices are Azure AD Hybrid Joined. Sign in to the Microsoft Endpoint Manager admin center. Select Devices. This view shows detailed information about the individual devices, and what you can do with them,. When BitLocker fails to enable on a Windows 10 device using an Intune policy, in most cases, the hardware or software prerequisites are not in place. Examining the BitLocker-API log will help you identify which prerequisite is not satisfied. The most common issues are: TPM is not present; WinRE is not enabled; UEFI BIOS is not enabled for TPM 2. Answer. If you just enrolled Windows 10 to Intune not long ago, maybe the process needs some time to take effect, please wait for a while, then view if outcome is different. If it still doesn't take effect, please check whether you are using ADFS, assigning a user to a specific Autopilot device doesn't work if you are using ASFS, for details. Oct 21st, 2020 at 9:23 AM check Best Answer. Text. Not evaluated: An initial state for newly enrolled devices. Other possible reasons for this state include: Devices that aren't assigned a compliance policy and don't have a trigger to check for compliance Devices that haven't checked in since the compliance policy was last updated Devices not.

wl

If you are unable to view the device in Intune Console and Info button is unavailable, the device has not enrolled into Intune for some reason. Check licenses for these users Confirm that these users fall into the MDM user scope for automatic Intune enrollment. Check the device's AAD state. Is it AAD joined after all. Refer Event Viewer logs-.

nb

tb

But the most important new additions are jailbreak detection for iOS and mobile application management (MAM) support for non-Intune enrolled devices on both Android and iOS. From now on, Microsoft. Deploy script. Once we validated that script is working on your device, we now can deploy it to Intune. For that go to endpoint.microsoft.com > Devices > macOS > Shell Scripts > Add. Now we need to specify options for our script. “Run script as signed-in user” – script will run on behalf of signed-in user. “Hide script notifications on. This article will describe what to when when Windows Updates are not installing on Intune devices. Situation: Customer coming from SCCM device management & application deployment. Migrated to Hybrid Joined Intune MDM managed devices. Updates came through SCCM pointing to WSUS server (location), configured by a GPO. Target:. Add your company’s logo and URL to preview the message; select the language for the message and preview it. Configure Organizational Messages from Intune Portal Fig.5. Here.

hj

Other apps are receiving the Managed App Protection Policy on enrolled devices, and the BYOD policy on non-enrolled devices. Except Outlook. Outlook will not receive the Managed app protection policy even when enrolled, with IntuneMAMUPN configured. The enrolled device shows "Conflict" under app reporting Troubleshoot > [my device] > App.

ln

Sign in to the Microsoft Endpoint Manager admin center. Select Devices. This view shows detailed information about the individual devices, and what you can do with them,.

qn

The Intune app protection policy must be assigned to user groups and not device groups. If the affected device uses Android Enterprise, only personally-owned work profiles will support app protection policies. If the affected device uses Apple's Automated Device Enrollment (ADE), make sure that User Affinity is enabled. User Affinity is.

dy

The grace period for the device to show up in the Intune portal again is before the device cert expires, which is 180 days. If you do not want devices to be able to check back in, consider filtering for stale devices and doing a bulk delete from the All devices view instead. 9-11-2020 Update made to clarify device types affected from device cleanup. You can go to Monitoring - Deployments and search for CoMgmt (it will show up as remediate). If you want the devices to quicken the process: Go to Control Panel - Configuration Manager and actions tab: Machine policy - run now Software updates deployment - run now Application deployment evaluation cycle - run now. To generate a sysdiagnose, run the following command from the enrolled Mac device with your desired save location (e.g. /Desktop for the logged in users' desktop): sudo sysdiagnose -f /path/to/desired/save/location To view just jamfAAD logs on a Mac for quick troubleshooting, run this command on the Mac to get the last 30 minutes of data:.


vq

bz

uv

dm

hj

Cloud apps or actions -> Select apps -> Microsoft Intune Enrollment. Conditions -> Device platforms -> Linux. Grant -> Block Access. When searching for a specific app, if you search for Intune you will find 4 different apps the only one we need. for this specific purpose is the “Microsoft Intune Enrollment” app.

Deploy script. Once we validated that script is working on your device, we now can deploy it to Intune. For that go to endpoint.microsoft.com > Devices > macOS > Shell Scripts > Add. Now we need to specify options for our script. "Run script as signed-in user" - script will run on behalf of signed-in user. "Hide script notifications on. Deploy script. Once we validated that script is working on your device, we now can deploy it to Intune. For that go to endpoint.microsoft.com > Devices > macOS > Shell Scripts > Add. Now we need to specify options for our script. “Run script as signed-in user” – script will run on behalf of signed-in user. “Hide script notifications on.

zu

ed

To succeed in this role, you will need: Proven success in a managed service or technical support role, operating at 3rd tier level or equivalent. Strong technical knowledge, covering deployment and troubleshooting, in the Company Core Service Stack - i.e.: Windows. Microsoft Endpoint Manager (including Intune and Configuration Manager). Generate a device report from the MEM Admin center to check and you would be actually surprised to see the number of devices that have not checked in with the service for more than a week or maybe even more. There can actually be several reasons for a managed device to stop syncing with Intune, like user not active, or.

co

hy

For device be to listed in AAD it has to complete its enrollment via Company Portal. This is where it gets its Azure AD Device ID assigned. This is based on below: After completing all the Setup Assistant screens, the end user lands on the home page (at which point their user affinity is established). However, until the user signs in to the. Deploy script. Once we validated that script is working on your device, we now can deploy it to Intune. For that go to endpoint.microsoft.com > Devices > macOS > Shell Scripts > Add. Now we need to specify options for our script. "Run script as signed-in user" - script will run on behalf of signed-in user. "Hide script notifications on. vcpkg users: check if you are using a vulnerable version of OpenSSL. WARNING: It is possible that OpenSSL is a part of your dependency graph even if your project does not directly depend on it. This is because other vcpkg ports may transitively depend on OpenSSL and thus vcpkg will install it for you.

lv

yc

Step 1: Install the language accessory pack. Select the version of Office you're using from the tabs below, then select the language desired from the drop-down list. Then choose the appropriate architecture (32-bit or 64-bit) from the download links provided.


lv

db

fu

I'm currently running into two issues with Intune and device managements of iOS devices. I have devices (iPhone/iPad; Corp and BYOD) that are actively being used, but are not checking in. These users later forget their passcode and I can't do anything, but wipe the device. Since the device is locked, I can't have the user open the Comp Portal app. By default, Intune devices check in every 8 hours. If Last check in is more than 24 hours, there may be an issue with the device. A device that can't check in can't receive your policies from Intune. To force check-in: On the Android device, open the Company Portal app > Devices > Choose the device from list > Check Device Settings.

hm

pr

To succeed in this role, you will need: Proven success in a managed service or technical support role, operating at 3rd tier level or equivalent. Strong technical knowledge, covering deployment and troubleshooting, in the Company Core Service Stack - i.e.: Windows. Microsoft Endpoint Manager (including Intune and Configuration Manager). But the most important new additions are jailbreak detection for iOS and mobile application management (MAM) support for non-Intune enrolled devices on both Android and iOS. From now on, Microsoft. Note the value in the Device limit column. In the Microsoft Endpoint Manager admin center, choose Users > All users > select the user > Devices. Note the number of devices the user has enrolled. If the user's number of enrolled devices already equals their device limit restriction, they can't enroll anymore until: Existing devices are removed, or.

xv

of

In this article. This article helps you understand and troubleshoot issues that you may encounter when you set up co-management by auto-enrolling existing Configuration Manager-managed devices into Intune.. In this scenario, you can continue to manage Windows 10 devices by using Configuration Manager, or you can selectively move workloads to Microsoft.

rc

oj

Go to your ConfigMgr console and under the Software Library\Scripts.Right-click and Create Script.. Give it a name and click Import.Select your PS1 file with the script. Click Next.. As with any imported script, it will need approval, so ask another admin to check this over and approve.

xr

qh

So first of all I would definitely not recommend resetting a user's password just so you can login yourself with his account configure the device - for obvious reasons (confidentiality, security, auditing etc.) Secondly, I understand that you are pre-provisioning a new/used device and then sending it to the user to login and finish up the rest.


td

zi

eq

Try the Windows Event logs as a next step in troubleshooting MDM issues. The MDM management events are logged to: Applications and Services. Stale device is the inactive device for a period of time. It is worked with Intune cleanup rules. You can set your Intune device cleanup rules to delete Intune MDM enrolled devices that appear inactive, stale, or unresponsive. ... Devices that aren't assigned a compliance policy and don't have a trigger to check for compliance; Devices that haven't checked in since.

si

yd

Note the value in the Device limit column. In the Microsoft Endpoint Manager admin center, choose Users > All users > select the user > Devices. Note the number of devices the user has enrolled. If the user's number of enrolled devices already equals their device limit restriction, they can't enroll anymore until: Existing devices are removed, or. Note the value in the Device limit column. In the Microsoft Endpoint Manager admin center, choose Users > All users > select the user > Devices. Note the number of devices the user has enrolled. If the user's number of enrolled devices already equals their device limit restriction, they can't enroll anymore until: Existing devices are removed, or. By default, Intune devices check in every 8 hours. If Last check in is more than 24 hours, there may be an issue with the device. A device that can't check in can't receive your policies from Intune. To force check-in: On the Android device, open the Company Portal app > Devices > Choose the device from list > Check Device Settings.

is

kl

The Intune app protection policy must be assigned to user groups and not device groups. If the affected device uses Android Enterprise, only personally-owned work profiles will support app protection policies. If the affected device uses Apple's Automated Device Enrollment (ADE), make sure that User Affinity is enabled. User Affinity is. For device be to listed in AAD it has to complete its enrollment via Company Portal. This is where it gets its Azure AD Device ID assigned. This is based on below: After completing all the Setup Assistant screens, the end user lands on the home page (at which point their user affinity is established). However, until the user signs in to the.


fg

et

ig

For example, the device may be turned off, or may not have a network connection. Eventually, the device becomes non-compliant, possibly after 30 days. For more information, see get started with device compliance policies. Last check in: Should be a recent time and date. By default, Intune devices check in every 8 hours. If Last check in is more. When you target a device or user with an action, then Intune immediately notifies the device to check in to receive these updates. For example, when a lock, passcode reset, app, or policy assignment action runs. We had this challenge a few days ago, it turned out to be an issue with the M365 Service. You can check that from the Intune Tenant Admin - tenant status tab from the MEM Admin Center portal. Under the Tenant status tab, there is a link to check the status of your Intune and other services for your tenant. Intune service status - See the current level of the service where you can get the position.

rd

dq

After a Windows 10 device is enrolled in Intune for some time (randomly from two minutes to two days), the device can no longer sync with Intune. When you start a manual sync on the device or in the Microsoft Endpoint Manager admin center, synchronization isn't started and the last sync time isn't updated. When this issue occurs, no errors are logged in the event logs.. Cloud apps or actions -> Select apps -> Microsoft Intune Enrollment. Conditions -> Device platforms -> Linux. Grant -> Block Access. When searching for a specific app, if you search for Intune you will find 4 different apps the only one we need. for this specific purpose is the “Microsoft Intune Enrollment” app. Sign in to the Microsoft Endpoint Manager admin center. Select Devices > Configuration profiles. Select your email profile > Properties > Settings. Set the Allow e-mail to be sent from third-party applications setting to Enable. Recommended content iOS/iPadOS device enrollment - Apple Configurator-Setup Assistant - Microsoft Intune. You can check that from the Intune Tenant Admin - tenant status tab from the MEM Admin Center portal. Under the Tenant status tab, there is a link to check the status of your Intune and other services for your tenant. Intune service status - See the current level of the service where you can get the position. The Intune app protection policy must be assigned to user groups and not device groups. If the affected device uses Android Enterprise, only personally-owned work profiles will support app protection policies. If the affected device uses Apple's Automated Device Enrollment (ADE), make sure that User Affinity is enabled. User Affinity is.

my

bq

Deploy script. Once we validated that script is working on your device, we now can deploy it to Intune. For that go to endpoint.microsoft.com > Devices > macOS > Shell Scripts > Add. Now we need to specify options for our script. “Run script as signed-in user” – script will run on behalf of signed-in user. “Hide script notifications on. We have enabled the GPO to automatically enroll devices in Intune/Endpoint Manager. All devices seem to enroll fine, as applications and settings that are pushed to the devices gets installed. By default, Intune devices check in every 8 hours. If Last check in is more than 24 hours, there may be an issue with the device. A device that can't check in can't receive your policies from Intune. To force check-in: On the Android device, open the Company Portal app > Devices > Choose the device from list > Check Device Settings. Once you have access to the device, the first step is to initiate a sync with the Intune service manually before collecting the data. On your Windows device, select Settings > Accounts > Access work or school > <Select your work or school account> > Info. Then under Device sync status, select Sync. This can only be done if they’re enrolled through apple business manager. The device (enrolled in intune) will become supervised and will let you force the update. We unfortunatly have a lot of.

But the most important new additions are jailbreak detection for iOS and mobile application management (MAM) support for non-Intune enrolled devices on both Android and iOS. From now on, Microsoft. In your Intune compliance policy, you can evaluate the encryption status of the device vide two settings as below Require BitLocker Encryption of data storage on device Because of the difference in the way in which the two compliance settings mentioned above are evaluated, there is a difference in the reporting behavior.

qf

xa

For device be to listed in AAD it has to complete its enrollment via Company Portal. This is where it gets its Azure AD Device ID assigned. This is based on below: After completing all the Setup Assistant screens, the end user lands on the home page (at which point their user affinity is established). However, until the user signs in to the. When BitLocker fails to enable on a Windows 10 device using an Intune policy, in most cases, the hardware or software prerequisites are not in place. Examining the BitLocker-API log will help you identify which prerequisite is not satisfied. The most common issues are: TPM is not present; WinRE is not enabled; UEFI BIOS is not enabled for TPM 2. Deploy script. Once we validated that script is working on your device, we now can deploy it to Intune. For that go to endpoint.microsoft.com > Devices > macOS > Shell Scripts >. You can go to Monitoring - Deployments and search for CoMgmt (it will show up as remediate). If you want the devices to quicken the process: Go to Control Panel - Configuration Manager and actions tab: Machine policy - run now Software updates deployment - run now Application deployment evaluation cycle - run now.

ai

xy

Add your company’s logo and URL to preview the message; select the language for the message and preview it. Configure Organizational Messages from Intune Portal Fig.5. Here In the Message tab, you will also have the option to set the theme for your message. I had toggled the switch to turn on the dark theme and move to the Schedule tab. The dmwappushservice service is required on client devices for Intune management. If this service is disabled, the device can't sync with Intune. Solution To fix the issue, change the startup type of the dmwappushservice service to Automatic. Recommended content Troubleshoot when you cannot delete a Windows Autopilot deployment profile - Intune.

zg

hz

Enhanced touchscreen, voice and pen support. Microsoft made Windows 11 easier to use on tablets than Windows 10. Microsoft/Screenshot by Sarah Tew/CNET. For tablets, Microsoft has aimed to improve. By default, Intune devices check in every 8 hours. If Last check in is more than 24 hours, there may be an issue with the device. A device that can't check in can't receive your policies from Intune. To force check-in: On the Android device, open the Company Portal app > Devices > Choose the device from list > Check Device Settings.

lj

vq

We have 600+ Lumia 650 Win10 devices deployed in 1 Intune tenancy and a lot of devices haven't updated/checked-in to intune in a while. Only about 1/4 have checked in today. Any changes made to the policies won't apply to these devices until they check in of course. With our team speaking to the majority of these users (regarding other issues. However, the device isn't automatically enrolled in Intune and no errors are seen This issue usually occurs when auto-enrollment is misconfigured in your Intune tenant under Azure Active Directory > Mobility (MDM and MAM) > Microsoft Intune. To fix the issue, follow the steps in Configure auto-enrollment of devices to Intune.


Windows Autopatch is a cloud service provided, by Microsoft, that automates the update process for Windows, Microsoft 365 Apps for enterprise, Microsoft Edge, and Microsoft Teams. The steps to get started with Windows Autopatch are pretty straight forward, especially with the latest adjustments of how the service interacts with the tenant.

vw

sh

hg


Devices check in with Intune at least every 8 hours. If it's been more that 24 since last check-in, there might be a problem with the device. A device that cannot check in cannot receive policies from Intune. To force a device to check in, follow the set of instructions below that matches the device's OS. These steps can be done from any.